HOME
PRODUCTS
Event
ABOUT US
CONTACT US
<
ENG
/
简体中文
/
繁體中文
>
Screws and Relevant Products
Machine Screws and Relevant Products
Tapping Screws
Heads & Drive Inserts of Screw
Plastic Wall Anchors
Rivets
Shafts and Pins
Turning Parts
Washers and Rings
Other
Finish
Enquiry Basket:
0
Product(s)
Home
>
Products
>
Screws and Relevant Products
>
Tapping Screws
To make general enquiries, click "
send enquiry
" button.
To make enquiries on particular products, click "
Add Now
".
Product Name:
Tapping Screws
Product Code:
AB
Type AB tapping screw shall have spaced threads, with same pitches as type B, and a gimlet point. Thay are primarily intended for use in thin metal, resin impregnated plywood, and asbestos composition.
Product Name:
Tapping Screws
Product Code:
A
Type A tapping screw shall have coarse spaced threads and a gimlet point. They are primarily intended for use in thin metal, resin impregnated plywood, and asbestos compositions.
Product Name:
Tapping Screws
Product Code:
B
Type B Tapping screw shall have spaced threads and a blunt point with incomplete entering threads. They are intended for use in materials, such as thin metal, nonferrous castings, plastics, resin impregnated plywood, and asbestos composition.
Product Name:
Tapping Screws
Product Code:
BF
Type BF Tapping screw have spaced threads with a blunt point and tapered entering threads, as on Type B, with one or more cutting edges and chip cavities. The tapered thread of the Type BF screws may be complete or incomplete at the manufacturer's option; These screw are intended for use in plastics, asbestos, and other similar composition.
Product Name:
Tapping Screws
Product Code:
BT
Type BT Tapping screw have spaced thread swith a blunt point and tapered entering threads, as on Type B, with one or more cutting edges and chip cavities. These screw are intended for use in plastics, asbestos, and other similar composition.
Product Name:
Tapping Screws
Product Code:
U
Type U Tapping screw shall have multiple start threads of large helix angle with a pilot point. These screws are intended for making permanent fastening s in metals and plastics, When forced into the work under pressure.
Product Name:
Tapping Screws
Product Code:
30 PT
Type PT tapping screw with a high 30 degree thread profile and recessed thread root, the PT screw provides increased thread engagement with minimal stress on the boss. It provides optimal performance in a wide range of thermoplastics.
Product Name:
Tapping Screws
Product Code:
HI-LO
Type Hi-Lo tapping screw have a double lead high and low thread form that increases performance in a broad range of low density materials such as plastic, wood masonite and particle board. The high thread has a 30° included angle that is sharper than a conventional thread. This reduces splitting and boss breakage, provides better drive/strip ratios and holds securely.
Total Products: 9
Page List:
1
2